Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 68 items
Amazing cutting performance that accommodates all processing conditions.
Increased cutting speed leads to improved productivity. Extended tool and cutter life. Enhanced finishing accuracy. Reduction in defective products. Decrease in waste oil due to deterioration and alteration of lubricants. This product contributes to cost reduction, rationalization, and quality improvement.
Non-hazardous oil-based cutting oil! Recommended for fire prevention measures.
The non-hazardous oil-based cutting oil "Super Cut 250 Series" has a flash point of 250°C or higher, classifying it as a non-hazardous material (flammable liquid) under fire safety laws. The explosion-proof specifications for storage warehouses and various notifications to the fire department are significantly relaxed compared to hazardous materials of Category 4 (Class 3 and 4 petroleum products). Additionally, since it is made from plant oils and synthetic oils, it is biodegradable, effective for smoke prevention, and contributes to environmental conservation. It is also gentle on the skin, allowing for safe use. For more details, please download the catalog.
Aerosol type cutting oil.
"Super Cut" does not contain chlorine, sulfur, or any solvents or heavy metals, so you can use it with confidence.
Oil-based cutting oil for automatic lathes, NC, MC machining, and brush application.
BCN-CF is a medium-viscosity cutting oil formulated with carefully selected raw materials, primarily developed for machining iron-based and nickel-chromium-based metals. It is designed for use in automatic machines, NC, and MC machines, circulated by pumps, and demonstrates excellent cutting performance, particularly in the machining of stainless steel and titanium, achieving significant tool life extension and precise dimensional accuracy in the finish.
It is a cutting oil that is friendly to people and the Earth's environment because it does not contain chlorine or sulfur.
BCN-32 CF is a general-purpose oil-based cutting oil that can be widely used for machining difficult materials such as stainless steel, as well as ferrous metals, aluminum, and non-ferrous metal alloys like copper.
Stainless steel has turned into tofu! The finishing surface is surprisingly beautiful with its astonishing cutting power.
High-performance cutting oil for brush application, Stenkororin, achieves optimal cutting edge configuration to suppress heat generation during processing. Experience its astonishing cutting power. This finish, this dimensional accuracy, this tool life—just a drop of Stenkororin has significantly changed cutting processes. With Stenkororin in red and green, you will no longer struggle with cutting performance on any metal. It contains no solvents like trichloroethane or heavy metals. It can also be used as an additive for press processing, tapping machines, machining centers, lathes, automatic lathes, hob machines, and more. For more details, please contact us or refer to the catalog.
Excluded from hazardous materials under the Fire Service Act! Cutting oil that does not contain PRTR-designated chemical substances.
"Chemicut F-920" is a high flash point oil-based cutting oil designated as a "flammable liquid" under the Fire Service Act. It is excluded from the hazardous materials category in storage facilities such as oil warehouses and tanks in production equipment, allowing for more flexibility regarding the designated quantities under the Fire Service Act. Additionally, it does not contain PRTR-designated chemical substances or chlorine-based extreme pressure agents, making it a product that aligns with the spirit of ISO 14000s. Its safety for human health is also extremely high. 【Features】 - Generates less mist due to its synthetic ester-based base oil - Low odor type improves the working environment - Non-chlorinated, preventing rust caused by decomposed chlorine - Extends tool life and increases productivity - Improves the finish surface For more details, please contact us or download the catalog.
I won't let you say it smells greasy anymore.
Trading Company: This company has a nice scent, doesn't it? President: Right? Actually, it's the smell of cutting oil. Trading Company: Really!? I had the impression that cutting oil is sticky, white, and smelly. President: We used to be like that too. That's why even when we hired people, they would quit right away. It was tough for both the site and management with the double punch of recruitment costs and labor shortages. Trading Company: I didn't know that. Because whenever I come here, there are always young people who are energetic, and even female operators, which makes me envious. President: One day, I realized that the smell of cutting oil was equated with the company's image, so I decided to change the cutting oil. Trading Company: Is that this purple one? President: Yes. It looks nice and smells good, right? Since we switched to this cutting oil, no one has quit. Thanks to that, our production efficiency has increased. Trading Company: It's just cutting oil, but it's also cutting oil. President: This cutting oil manufacturer aims to transform the Showa era's 3K "Smelly, Dirty, Dangerous" into the Reiwa era's 3K "Clean, Comfortable, Cool," and improve the image of the manufacturing industry. Trading Company: That's great! Sanrin Koyu is an interesting company.
We offer a variety of cutting oils and lubricants that contribute to hazardous material quantity management and fire prevention measures.
We handle various cutting oils and lubricants that do not fall under hazardous materials. Many oil products are classified as hazardous materials of Category 4, and their storage quantities are strictly regulated by the Fire Service Act. According to the Fire Service Act, products with a flash point of 250°C or higher are classified as non-hazardous materials (designated combustible materials, flammable liquids), and the storage quantity regulations are relaxed. Additionally, we offer flame-retardant oils that not only avoid the Fire Service Act but also actually reduce fire risks. 【Products We Handle】 ■ Designated combustible non-water-soluble cutting oil "Eagle Cut UF Series" ■ Designated combustible bearing oil "Spindle UF-15" ■ Water-containing cutting oil "Eagle Cut W-303" ■ Flame-retardant hydraulic oil *For more details, please refer to the PDF materials or feel free to contact us.
Aircraft parts, 64 titanium, difficult-to-machine materials, heat-resistant steel!
The "Hangstarfar S-787" is a high-performance water-soluble cutting oil that maintains long-term potential and can be used with minimal replenishment. It combines lubrication comparable to emulsions with cooling properties superior to solutions. Developed for airport machine materials, it is suitable for machining difficult materials such as aluminum alloys, nickel alloys, and titanium alloys. 【Features】 ■ Balances lubrication and cooling ■ Maintains machinability over a long period ■ Can be used with minimal replenishment ■ Suitable for machining difficult materials ■ No physical issues such as skin irritation have occurred *For more details, please refer to the catalog or feel free to contact us.
Soluble cutting oil suitable for a wide range of materials and processing!
The "Micro Cut 700RF" is a fully synthetic oil that exhibits lubrication comparable to that of emulsions and is free of mineral oils. It has minimal discoloration and corrosion on aluminum and copper alloys, excellent foam suppression, and is suitable for high-pressure lubrication systems. Additionally, it does not fall under the PRTR law and is designed with consideration for skin disorders (such as hand dermatitis), making it a user-friendly product for operators. 【Features】 ■ Free of mineral oils ■ Not subject to the PRTR law ■ Minimal discoloration and corrosion on aluminum and copper alloys ■ Reduced liquid adhesion to machines and workpieces ■ Decreased liquid carry-out, leading to reduced replenishment amounts *For more details, please refer to the catalog or feel free to contact us.
[Must-see for those in Ibaraki, Tochigi, Fukushima, and Chiba] Synthetic solution-type cutting oil compatible with general work, stainless steel, and heat-resistant steel!
"Micro Cut 2010H" is a high-performance synthetic solution type cutting and grinding oil that is oil-free and PRTR-free. By employing special lubricants, it demonstrates excellent machinability, cooling properties, and rust prevention. Additionally, it has low stickiness, excellent washability, and does not worsen the working environment. Furthermore, its superior antibacterial effect extends the coolant's lifespan and allows for the reduction of waste liquid volume and replenishment frequency. 【Features】 ■ Excellent machinability, cooling properties, and rust prevention ■ Prevents deterioration of the working environment ■ Excellent separation of mixed oils and chips ■ Long-lasting liquid transparency ■ Excellent defoaming properties, suitable for high-pressure lubrication processing *For more details, please refer to the catalog or feel free to contact us.
![[Suggestion] Are you holding too much dangerous oil?](https://image.mono.ipros.com/public/product/image/189/2000350551/IPROS4577243871312688969.jpg?w=280&h=280)
More than half of national companies exceed hazardous material storage limits! Here is a proposal from Shinwalbutech as a countermeasure.
Until now, when it came to oil storage, we only counted the inventory in drums and cans. However, recently there has been a trend to consider the total storage amount as the inventory plus the oil inside the machines (hydraulic oil, sliding surface oil, gear oil, cutting oil). Generally, commonly used lubricants (hydraulic, bearing, sliding) and cutting oils (only oil-based) are mostly third-class petroleum products, with a storage amount equivalent to 10 drums of 2000L. Furthermore, if kerosene or hydrocarbon-based cleaning liquids are used for fuel or cleaning, the total becomes even more significant. Therefore, we would like to introduce two types of fourth-class petroleum products that triple the storage amount, as well as the 5000 series that falls under designated combustible materials with no regulations. I believe it may be difficult to understand with just a simple explanation. We have the experience and know-how, so please feel free to contact us directly by phone or email. 【Two proposals as countermeasures】 ■ Make it water-soluble ■ Non-water-soluble cutting oil ・ Fourth-class petroleum (6000 series) ・ Designated combustible materials (5000 series) *For more details, please feel free to contact us.
Environmentally friendly product (chlorine-free)! Universal type cutting oil.
"Saskat SUS-365" is a cutting oil suitable for tapping, threading, drilling, reaming, and broaching of materials such as stainless steel, aluminum, copper, and titanium alloys. It can be used for most cutting and grinding operations. Its strong penetration and high lubrication properties increase cutting speed and improve work efficiency. 【Features】 ■ Does not contain chlorine-based extreme pressure agents ■ Reduces tool wear and extends tool life ■ Improves finish quality and enhances dimensional accuracy ■ Usable for band saws and metal saws as well *For more details, please download the PDF or contact us.
Suitable for most cutting and grinding processes! Environmentally friendly product (chlorine-free, plant-based oil)
The "Saskat NS-500" is an environmentally friendly cutting oil (chlorine-free and plant-based) that enhances cutting speed and improves work efficiency due to its strong penetration and high lubrication properties. It can be used for lubrication in tapping, threading, drilling, reaming, broaching, metal sawing, band sawing, and other machining of difficult-to-cut materials such as stainless steel, aluminum, and titanium alloys. 【Features】 ■ Usable for most cutting and grinding processes ■ Safe as it does not contain chlorine-based additives ■ Reduces tool wear and extends tool life ■ Improves surface finish and dimensional accuracy, and can be used safely as it is plant-based *For more details, please download the PDF or contact us.
![[Example] Nano-collagen oil spray active in factories and production sites.](https://image.mono.ipros.com/public/product/image/706/2000443866/IPROS45561495757771763283.jpeg?w=280&h=280)
Introducing a case that compares the differences between cutting oil and nano-colloids! Active in maintenance workshop settings as well.
We introduce the lubricant "Nano Koro Oil Spray," which uniquely incorporates CNT (carbon nanotubes) into a highly permeable lubricant, used in factories and production sites. We compared the differences in cutting oil during drilling operations using a drill press, focusing on workability and finish against commercially available cutting oils. [Issue] Commercially available cutting oil The test piece got caught at the moment the hole was being drilled, resulting in a lot of burrs on the back, necessitating secondary processing. ↓ [Solution] Nano Koro Oil Spray The working time was reduced, and with a drill larger than the hole, small burrs could be easily removed by hand, allowing for smooth drilling without getting caught at the moment of drilling. *For more details, please refer to the PDF document or feel free to contact us.
![[Improvement Case] Significant reduction of oil mist with only the change of non-water-soluble cutting oil.](https://image.mono.ipros.com/public/product/image/2093690/IPROS8781881006045947132.jpg?w=280&h=280)
We will introduce a case where the oil mist visibly decreased, significantly reducing the adherence and stickiness to workers' hair and clothing!
We received an inquiry from a customer using oil-based cutting oil in a machining center, and we would like to introduce a case where we proposed a paraffin-rich oil-based cutting oil. Before the introduction, there was a challenge of excessive oil mist generation, which worsened the working environment. After the introduction, the oil mist visibly decreased, significantly reducing the adherence of oil to the workers' hair and clothing, as well as the stickiness. 【Challenges Before Introduction】 ■ Workers' hair and clothing became sticky and smelled of oil. ■ The area around the machines became sticky, dirtying the ceiling and worsening the working environment. ■ When blowing off chips after processing, it was difficult to remove them, which occasionally caused scratches on the workpieces and resulted in defects. *For more details, please download the PDF or feel free to contact us.
![[Improvement Case] Switching to cutting oil with a longer fluid life to reduce costs.](https://image.mono.ipros.com/public/product/image/2093690/IPROS6155435490898616167.jpg?w=280&h=280)
We will introduce a case where the service life of cutting oil was extended to more than twice, reducing waste liquid treatment costs and labor expenses!
We received feedback from a company in Niigata Prefecture expressing a desire to test an oil agent that is considerate of hands, has a long liquid lifespan, and is less sticky. In response, we proposed an oil agent from the soluble type that is gentle on the skin and has good oil separation properties. While conventional oil agents would spoil in about three months, our product has shown no issues even after more than six months, successfully reducing waste liquid disposal costs by approximately 40,000 yen per machine annually due to the extended liquid lifespan. Additionally, by providing on-site support to enhance operators' awareness of oil agent management and conducting regular liquid analysis for quantitative management, we expect the liquid replacement cycle to be further extended. [Background of Introduction] - The previously used water-soluble cutting oil spoiled and produced an unpleasant odor. - Complaints were received from workers. - Due to past issues with hand irritation, there was a desire to test an oil agent that is considerate of hands and has a long liquid lifespan with less stickiness. *For more details, please download the PDF or feel free to contact us.*
![[Improvement Case] Suppressing discoloration of water-soluble cutting oil and improving production efficiency.](https://image.mono.ipros.com/public/product/image/2093690/IPROS6842641130926794953.png?w=280&h=280)
This leads to a significant improvement in production efficiency, keeping the machining room and windows of the machines in a clean condition.
We would like to introduce a case that contributed to suppressing the discoloration of water-soluble cutting oil, improving production efficiency and enhancing the working environment. Previously, while processing cast parts with machining centers and NC lathes, the water-soluble cutting oil used would become brown and dirty within about 2 to 3 months after replacement. After the improvement, the cutting oil no longer became brown and dirty, allowing it to be used for 2 years without replacement, and there was no need to wash it with a parts cleaner. [Case Overview] ■ Issues - Water-soluble cutting oil becomes brown and dirty within about 2 to 3 months after replacement. - Cleaning products and fully replacing cutting oil is labor-intensive. ■ Benefits of Implementation - The frequency of cutting oil replacement was extended from 3 months to 2 years. - There was no longer a need to use parts cleaner for product cleaning. *For more details, please download the PDF or feel free to contact us.
![[Improvement Case] Elimination of rust on products occurring after processing with water-soluble cutting oil.](https://image.mono.ipros.com/public/product/image/2093690/IPROS13189436363120627698.png?w=280&h=280)
The amount of dirt entering the rust prevention oil has decreased, allowing us to extend the replacement cycle of the rust prevention oil!
Here is a case study on eliminating rust on products that occurs after processing with water-soluble cutting oil. The background for this introduction is that after rust prevention treatment, rust appeared on several products, leading to an increase in the amount of rust prevention oil used and resulting in higher costs. By being able to remove the components of the water-soluble cutting oil down to minimal residues, the performance of the rust prevention oil began to act on the metal surface, resolving the rust issue. 【Case Summary】 ■Challenges - Rust on products, increased usage of rust prevention oil ■Benefits - Elimination of rust, annual cost reduction of 500,000 yen *For more details, please download the PDF or feel free to contact us.
![[Improvement Case] Successful enhancement of processing accuracy and reduction of total costs.](https://image.mono.ipros.com/public/product/image/2093690/IPROS13334001019239306135.png?w=280&h=280)
The reduction of stickiness around the machinery has made it less slippery when walking, improving safety!
We would like to introduce a case where a company in Niigata Prefecture successfully improved processing accuracy and reduced total costs by switching cutting oils upon request from their client. This company had been using chlorine-based water-soluble cutting oil, but received a notice from their client requesting that they stop using cutting oils containing chlorine, prompting them to consider switching cutting oils. After the switch, not only did they manage to meet the client's request while improving processing accuracy, but the reduction in stickiness around the machines also made walking safer by decreasing the risk of slipping. 【Case Overview】 ■Challenges - A switch from chlorine-containing cutting oil was necessary due to a request from the client. ■Benefits of Implementation - Successfully improved processing accuracy and reduced total costs while responding to the client's request. *For more details, please download the PDF or feel free to contact us.
Cutting oil mist! For concerns such as the factory appearing hazy.
"Super Mist Cut" is an oil mist control type cutting oil that minimizes the oil mist generated from oil-based cutting oils. We offer two types: inert types such as "A-5A" and "A-200," and active types such as "RS-80" and "RS-101." If you are experiencing issues such as oil stains on machine tools or floors, or oil dripping from the ceiling in your factory, please give our product a try. [For concerns like these] ■ The factory appears hazy ■ Machine tools and floors are stained with oil ■ Oil is dripping from the ceiling in the factory ■ Work clothes smell of oil *For more details, please refer to the PDF document or feel free to contact us.
Achieve high cooling performance with excellent degassing capability! High-performance cutting oil suitable for tool grinding and regrinding processes.
The "Braso Grind GTC7" is a high-performance cutting oil that achieves excellent cooling properties due to its high degassing performance. It is suitable for tool grinding and regrinding processes, particularly for grinding cemented carbide, HSS (high-speed steel), and cermet. Additionally, it is compatible with total form and creep feed grinding. 【Features】 ■ Suppresses cobalt leaching during cemented carbide grinding ■ Colorless and transparent, providing good visibility during processing ■ Minimal odor, creating a comfortable working environment ■ Well-suited for grinding cemented carbide, HSS (high-speed steel), and cermet ■ Compatible with total form and creep feed grinding *For more details, please refer to the PDF document or feel free to contact us.
Introducing the functions of cutting oils! It is important to choose cutting oils that are suitable for the machining methods and conditions.
When performing machining with lathes, milling machines, and grinding machines, applying liquid to the workpiece improves machining efficiency and finishing quality. The liquid used is typically a lubricant known as "cutting oil." Subsequently, due to the demand for improved machining efficiency, cutting fluids that can be diluted with water for rapid cooling were developed, and these are collectively referred to as "cutting fluids." In other words, cutting fluids are divided into oil-based non-water-soluble cutting fluids that can be used as is without dilution, and water-soluble cutting fluids that are used when diluted with water. In recent years, with the demands of industrial processing for QCD—namely high quality, high precision, cost reduction, and shorter delivery times—the importance of cutting fluids has also increased. Due to the differences in cutting fluids, not only finishing quality but also tool life and machining environment can be affected, making it essential to choose cutting fluids that are suitable for the machining methods and conditions. *For more details, please refer to the PDF document or feel free to contact us.*
Professional in the sale of industrial lubricants such as lubricating oil, cutting oil, and grease.
＝＝＝＝＝ Overview ＝＝＝＝＝ As a professional in the sale of industrial lubricants such as lubricating oils, cutting oils, and greases, our goal is to provide products that meet our customers' needs. We are equipped to supply lubricants from various manufacturers, prioritizing the customer's perspective, and we can also propose lubrication services such as lubrication management and waste oil collection. ＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋ ★ For more details, please request our materials for confirmation. ＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋＋ ＝＝＝＝＝ Example of Special Products ＝＝＝＝＝ - Additives for metalworking oils - Liquid paraffin - Coatings that do not use lubricating oils - Cutting oils and grinding oils - Plastic processing oils (punching, drawing, forging) - Rust prevention oils ＝＝＝＝＝ Others ＝＝＝＝＝ ● Total Lube Service We provide not only product supply but also detailed lubrication services such as 'delivery', 'waste oil collection', 'oil filling and replacement work', and 'technical services'.
Successful development of a cutting oil that minimizes oil mist generated from oil-based cutting fluids. Are you troubled by oil mist in your factory?
The oil mist control type cutting oil "Super Mist Cut" is a lubricant that minimizes the oil mist generated from oil-based cutting oils. Our company enables mist-free environments in factories, keeping the working environment clean. It is suitable for factories that have obtained ISO 14001 certification, as well as for customers considering certification or those who meet any of the following criteria: - The factory sometimes appears hazy. - Machine tools and floors are dirty with oil. - Oil drips from the ceiling in the factory. - Work clothes smell of oil. - Cannot be completely collected by mist collectors. The appearance changes dramatically, and it has received positive feedback from many workers! *Custom proposals can be made according to the materials being processed and desired flash points, so please contact us for more details or download the catalog.
Fire safety measures! Significantly improve storage capacity.
The high flash point oil-based cutting oil "Super Cut 200 Series" is a cutting oil that falls under Class 4, Category 4 petroleum products of the Fire Service Act, with a flash point of 200°C or higher. The base oil used is tasteless, odorless, and colorless, and has been approved by the FDA (U.S. Food and Drug Administration), ensuring high safety for the product and consideration for the health of the operators using it. Additionally, due to the extremely low content of impurities, it is also effective for smoke prevention. For more details, please download the catalog.
A lineup of versatile types, products for difficult machining, and resin tools!
The "Diamond Cut Series" is a cutting oil that meets various expectations for grinding processing. We offer type "S," which is compatible with various optical materials, and type "W," which is specialized for difficult-to-machine materials (such as sapphire and quartz). Additionally, we have type "F," which is specialized for resin diamond tools (triethanolamine removal type). 【Specifications (excerpt)】 ■pH ・S: 7.8 ・W: 8.6 ・F: 8.6 *For more details, please refer to the PDF document or feel free to contact us.
Oil-based cutting oil for brush application and mist (MQL).
The components of the stainless steel and titanium are made entirely from substances extracted from animals and plants, and they have a high biodegradability (in the event that they flow into rivers, 94% of the components will biodegrade within 21 days, according to the CEC L-33-A-94 test). Additionally, they do not contain any chlorine, sulfur, phosphorus, mineral oils, solvents, or heavy metals, making this cutting oil very friendly to both the human body and the global environment.
